Valorization of waste oil palm (Elaeis guineensis Jacq.) biomass through furfurylation

Malaysia is the biggest producer of palm oil in the world. The production generates large amounts of waste trunks which should be considered a valuable bio-feedstock rather than waste. An approach for valorization of waste oil palm biomass – especially that of low density hardly applicable in industry – through furfurylation was investigated. Furfuryl alcohol treatment resulted in great improvement in the properties of the material: 200% density gain, water absorption and thickness swelling reduced by 50% and 74%, respectively, hardness increased by 400%, as well as 3.5-fold and 7.4-fold increase, respectively, in bending strength and modulus of elasticity was observed. Alternations in physical and mechanical properties of oil palm trunk combined with aesthetic changes due to material darkening may be considered an effective approach for conversion of waste biomass to novel materials of enhanced technical value

Treatment of high- and intermediate-high-risk pulmonary embolism by the Pulmonary Embolism Response Team: Focus on catheter-directed therapies

Background: Multidisciplinary Pulmonary Embolism Response Teams (PERTs) were established to individualize the treatment of high-risk (HR) and intermediate-high-risk (IHR) pulmonary embolism (PE) patients, which pose a challenge in clinical practice. Methods: We retrospectively collected the data of all HR and IHR acute PE patients consulted by PERT CELZAT between September 2017 and October 2022. The patient population was divided into four different treatment methods: anticoagulation alone (AC), systemic thrombolysis (ST), surgical embolectomy (SE), and catheter-directed therapies (CDTx). Baseline clinical characteristics, risk stratification, PE severity parameters, and treatment outcomes were compared between the four groups. Results: Of the 110 patients with HR and IHR PE, 67 (61%) patients were treated with AC only, 11 (10%) with ST, 15 (14%) underwent SE, and 17 (15%) were treated with CTDx. The most common treatment option in the HR group was reperfusion therapy, used in 20/24 (83%) cases, including ST in 7 (29%) patients, SE in 5 (21%) patients, and CTDx in 8 (33%) patients. In contrast, IHR patients were treated with AC alone in 63/86 (73%) cases. The in-hospital mortality rate was 9/24 (37.5%) in the HR group and 4/86 (4.7%) in the IHR group. Conclusions: The number of advanced procedures aimed at reperfusion was substantially higher in the HR group than in the IHR PE group. Despite the common use of advanced reperfusion techniques in the HR group, patient mortality remained high. There is a need further to optimize the treatment of patients with HR PE to improve outcomes

Characterization of Thermal and Mechanical Properties of Lignosulfonate- and Hydrolyzed Lignosulfonate-based Polyurethane Foams

Lignosulfonate and lignosulfonate hydrolyzed under alkaline conditions were used as the polyol components in polyurethane foam formulations. Although the treatment increased hydroxyl group abundance, it did not improve the applicability of hydrolyzed lignosulfonate in polyurethane foam. Thus, the use of original lignosulfonate yielded foams of thermal stability and mechanical properties comparable to other types of bio-based foams (Young’s moduli 0.95 to 4.42 MPa, 50% weight loss, and temperature ca. 500 °C). Lignosulfonates can be a renewable polyol component for the formulation of rigid, semi-rigid, and flexible foams

Evolving Microbial Communities in Cellulose-Fed Microbial Fuel Cell

The abundance of cellulosic wastes make them attractive source of energy for producing electricity in microbial fuel cells (MFCs). However, electricity production from cellulose requires obligate anaerobes that can degrade cellulose and transfer electrons to the electrode (exoelectrogens), and thus most previous MFC studies have been conducted using two-chamber systems to avoid oxygen contamination of the anode. Single-chamber, air-cathode MFCs typically produce higher power densities than aqueous catholyte MFCs and avoid energy input for the cathodic reaction. To better understand the bacterial communities that evolve in single-chamber air-cathode MFCs fed cellulose, we examined the changes in the bacterial consortium in an MFC fed cellulose over time. The most predominant bacteria shown to be capable electron generation was Firmicutes, with the fermenters decomposing cellulose Bacteroidetes. The main genera developed after extended operation of the cellulose-fed MFC were cellulolytic strains, fermenters and electrogens that included: Parabacteroides, Proteiniphilum, Catonella and Clostridium. These results demonstrate that different communities evolve in air-cathode MFCs fed cellulose than the previous two-chamber reactors